Skip to main content
Light
← All guides Grades

How to Calculate What You Need on a Final

· 5 min read

The question is always the same: what do I need on the final to get the grade I want? The arithmetic is simple, the hard part is knowing which numbers to put in, and what to do when the answer is above 100.

Here is the whole method, then the cases where it goes wrong.

The formula

Your course grade is the weighted average of what you have so far and the final. If the final is worth F percent, then your current work is worth 100 minus F percent.

Required final score = (target grade − current grade × (1 − F)) ÷ F

Where all grades are decimals: 87 percent is 0.87, a final worth 20 percent is 0.20.

A worked example

You have an 84 in the class, the final is worth 25 percent, and you want a 90.

Required = (0.90 − 0.84 × 0.75) ÷ 0.25 = (0.90 − 0.63) ÷ 0.25 = 0.27 ÷ 0.25 = 1.08.

You need 108 percent, which means the target is not reachable on the final alone. Better to know that now than after the exam.

Where the numbers go wrong

Three mistakes account for most of the bad answers.

  • Using the unweighted average when categories are weighted. Check the syllabus, not the portal's summary.
  • Forgetting that the final replaces a dropped test or counts in a category. Ask the teacher if the syllabus is unclear.
  • Treating an in-progress grade as final. If three assignments are ungraded, your current grade will move before the final does.

When the answer is above 100

It means the target is not available through the final alone. There are still options: extra credit if the teacher offers it, a conversation about which assignment carries the most weight, or accepting a lower target and protecting the other classes instead.

That last one is not defeat. Spending fifteen hours chasing an unreachable A in one class while a reachable B slips in another is the most common bad trade in exam season.

The GPA version of the question

The same arithmetic works one level up. If you know the likely grade in each course and the credit hours each course carries, you can work out what a strong final in one class does to your term GPA before you sit the exam.

That is worth doing when two finals are on the same day and you cannot prepare equally for both. Comparing the GPA effect of an extra five hours in each class is a better use of the decision than comparing how much you like the subjects.

Use the number to plan, not to worry

Once you know you need a 92, you can decide how much time the final deserves relative to everything else that week. That is a scheduling decision, and it is much easier to make with a number than with a feeling.

The final grade calculator on this site does the arithmetic for you, and IntelliPlan's grade modeler extends it to whole-course and GPA effects so you can compare several classes at once.

Turn this into a plan for your week

IntelliPlan imports your assignments, ranks them by what is actually urgent, and builds a study schedule around the hours you have. Free to start.

Get started free

Make it yours

Saved on this device. Your system accessibility preferences take priority. Tool access is managed separately by your school.